F065
ເສັ້ນຜ່າສູນກາງທີ່ກຳນົດໄວ້ຂອງທໍ່ດ້ານນອກ:
- ແນະນຳໂດຍມາດຕະຖານວິສາຫະກິດຂອງອຸປະກອນ HL Cryogenic. ມັນຍັງສາມາດຜະລິດໄດ້ຕາມຄວາມຕ້ອງການຂອງລູກຄ້າ.
- ຄວາມກົດດັນໃນການອອກແບບ:
- ແນະນຳໃຫ້ໃຊ້ ≤ 16 ບາ. ຫຼື ເລືອກປະເພດການເຊື່ອມຕໍ່ແບບເຊື່ອມ (≤40 ບາ).
- ວັດສະດຸຂອງທໍ່ນອກ
ໂດຍບໍ່ມີຄວາມຕ້ອງການພິເສດ, ວັດສະດຸຂອງທໍ່ດ້ານໃນ ແລະ ທໍ່ດ້ານນອກຈະຖືກເລືອກຄືກັນ.
3.1.3 ປະເພດການເຊື່ອມຕໍ່ແບບເຊື່ອມ
ໂອເດວ
ການເຊື່ອມຕໍ່
ປະເພດ
ເສັ້ນຜ່າສູນກາງທີ່ກຳນົດໄວ້ຂອງທໍ່ພາຍໃນ
ຄວາມກົດດັນດ້ານການອອກແບບ
ວັດສະດຸ
ຂອງທໍ່ພາຍໃນ
ມາດຕະຖານ
ໝາຍເຫດ
W010
00X
ປະເພດການເຊື່ອມຕໍ່ທີ່ເຊື່ອມສຳລັບທໍ່ອ່ອນນຸ້ມທີ່ມີฉนวนສູນຍາກາດຄົງທີ່
DN10, 3/8"
8~40 ບາ
ເຫຼັກສະແຕນເລດຊຸດ 300
ASME B31.3
| V | DN20, 3/4" | DN25, 1" | ເສັ້ນຜ່າສູນກາງທີ່ກຳນົດໄວ້ຂອງທໍ່ດ້ານນອກ: | |
| ຄວາມກົດດັນດ້ານການອອກແບບ | ວັດສະດຸຂອງທໍ່ພາຍໃນ. | A ແມ່ນ 304, | DN40, 1-1/2" | C ແມ່ນ 316, |
| D ແມ່ນ 316L, | HLHS | HLHS | W015 | 00X |
| DN15, 1/2" | No | No | HLHS | ຄວາມກົດດັນດ້ານການອອກແບບ |
| Nominal Diameter of Inner Pipe | 00X | HLHS | W025 | 00X |
| Design Pressure | HLHS | DN32, 1-1/4" | 00X | DN32, 1-1/4" |
| HLHS | HLHS | HLHS | DN40, 1-1/2" | HLHS |
| ແນະນຳ ≤ DN25 ຫຼື 1". ຫຼື ເລືອກປະເພດການເຊື່ອມຕໍ່ແບບ Vacuum Bayonet ພ້ອມດ້ວຍແປນ ແລະ ສະກູ (ຈາກ DN10, 3/8" ຫາ DN80, 3"), ປະເພດການເຊື່ອມຕໍ່ແບບເຊື່ອມ (ຈາກ DN10, 3/8" ຫາ DN150, 6") | 00X | |||
| DN50, 2" | HLHS | |||
| Material | 300 Series Stainless Steel | |||
| ມາດຕະຖານ | LN2HLHS2W080 | |||
00X
DN80, 3"
| LHSW100 | |
| 00X | |
| DN100, 4" |  |
LHSW125
| 00X | DN125, 5" | LHSW150 | 00X | DN150, 6" | ເສັ້ນຜ່າສູນກາງທີ່ກຳນົດໄວ້ຂອງທໍ່ດ້ານນອກ: |
| ແນະນຳໂດຍມາດຕະຖານວິສາຫະກິດຂອງອຸປະກອນ HL Cryogenic. ມັນຍັງສາມາດຜະລິດໄດ້ຕາມຄວາມຕ້ອງການຂອງລູກຄ້າ. | ວັດສະດຸຂອງທໍ່ນອກ | DN25, 1" | DN25, 1" | DN25, 1" | DN25, 1" |
| ປະເພດ | DN25, 1" | DN25, 1" | DN25, 1" | DN25, 1" | |
| ມາດຕະຖານ | DN25, 1" | DN25, 1" | DN25, 1" | DN25, 1" | |
| DN10, 3/8" | DN25, 1" | DN25, 1" | DN25, 1" | DN25, 1" | |
| ຄວາມກົດດັນໃນການອອກແບບ. | / | DN25, 1" | DN25, 1" | / | |
| ວັດສະດຸຂອງທໍ່ພາຍໃນ. | / | DN25, 1" | DN25, 1" | / | |
| C ແມ່ນ 316, | / | DN25, 1" | DN25, 1" | / | |
| HLHS | / | DN25, 1" | DN25, 1" | / | |
| DN15, 1/2" | / | DN25, 1" | DN25, 1" | / | |
| 00X | / | / | DN25, 1" | / | |
| HLHS | / | / | DN25, 1" | / | |
| 00X | / | / | DN25, 1" | / |
ເສັ້ນຜ່າສູນກາງທີ່ກຳນົດໄວ້ຂອງທໍ່ພາຍໃນ:
| ແນະນຳ ≤ DN25 ຫຼື 1". ຫຼື ເລືອກປະເພດການເຊື່ອມຕໍ່ແບບ Vacuum Bayonet ພ້ອມດ້ວຍແປນ ແລະ ສະກູ (ຈາກ DN10, 3/8" ຫາ DN80, 3"), ປະເພດການເຊື່ອມຕໍ່ແບບເຊື່ອມ (ຈາກ DN10, 3/8" ຫາ DN150, 6") | ເສັ້ນຜ່າສູນກາງທີ່ກຳນົດໄວ້ຂອງທໍ່ດ້ານນອກ: |
| ແນະນຳໂດຍມາດຕະຖານວິສາຫະກິດຂອງອຸປະກອນ HL Cryogenic. ມັນຍັງສາມາດຜະລິດໄດ້ຕາມຄວາມຕ້ອງການຂອງລູກຄ້າ. | ຄວາມກົດດັນໃນການອອກແບບ: |
| ແນະນຳ ≤ 16 ບາ. ຫຼືເລືອກປະເພດການເຊື່ອມຕໍ່ແບບເຊື່ອມ (≤40 ບາ) | ວັດສະດຸຂອງທໍ່ນອກໂດຍບໍ່ມີຄວາມຕ້ອງການພິເສດ, ວັດສະດຸຂອງທໍ່ດ້ານໃນ ແລະ ທໍ່ດ້ານນອກຈະຖືກເລືອກຄືກັນ.3.2 ລະບົບທໍ່ສນວນສູນຍາກາດແບບໄດນາມິກ3/S |
| 3.2.1 ປະເພດການເຊື່ອມຕໍ່ແບບ Bayonet ສູບອາກາດພ້ອມດ້ວຍແຄ້ມ | ໂອເດວ |
| ການເຊື່ອມຕໍ່ | ປະເພດ |
| ເສັ້ນຜ່າສູນກາງທີ່ກຳນົດໄວ້ຂອງທໍ່ພາຍໃນ | ຄວາມກົດດັນດ້ານການອອກແບບ |
| ວັດສະດຸ | ຂອງທໍ່ພາຍໃນ |
| ມາດຕະຖານ | ໝາຍເຫດ |
HDB01008
ປະເພດການເຊື່ອມຕໍ່ແບບ Bayonet ສູນຍາກາດພ້ອມແຄ້ມສຳລັບທໍ່ອ່ອນທີ່ມີฉนวนສູນຍາກາດແບບໄດນາມິກ
lDN10, 3/8"
l8 ບາ
| ເຫຼັກສະແຕນເລດຊຸດ 300 C ແມ່ນ 316, | ວັດສະດຸຂອງທໍ່ພາຍໃນ. | |
| A ແມ່ນ 304, | B ແມ່ນ 304L,C ແມ່ນ 316,D ແມ່ນ 316L, | |
| E ແມ່ນອື່ນ. | HLH | DB01508 |
| DN15, 1/2" | ຄວາມກົດດັນໃນການອອກແບບ: | ຄວາມກົດດັນໃນການອອກແບບ: |
| DN20, 3/4" | ຄວາມກົດດັນໃນການອອກແບບ: | ຄວາມກົດດັນໃນການອອກແບບ: |
| DN25, 1" | ຄວາມກົດດັນໃນການອອກແບບ: | ຄວາມກົດດັນໃນການອອກແບບ: |
| ເສັ້ນຜ່າສູນກາງທີ່ກຳນົດໄວ້ຂອງທໍ່ດ້ານນອກ: | ຄວາມກົດດັນໃນການອອກແບບ: | ຄວາມກົດດັນໃນການອອກແບບ: |
ແນະນຳ ≤ 8 ບາ. ຫຼືເລືອກປະເພດການເຊື່ອມຕໍ່ແບບບາໂຢເນັດສູນຍາກາດທີ່ມີແປນ ແລະ ສະກູ (≤16 ບາ), ປະເພດການເຊື່ອມຕໍ່ແບບເຊື່ອມ (≤40 ບາ)ວັດສະດຸຂອງທໍ່ນອກໂດຍບໍ່ມີຄວາມຕ້ອງການພິເສດ, ວັດສະດຸຂອງທໍ່ດ້ານໃນ ແລະ ທໍ່ດ້ານນອກຈະຖືກເລືອກຄືກັນ.
ສະພາບພະລັງງານ:
HL-HX-X-ສະຖານທີ່ດັ່ງກ່າວຈຳເປັນຕ້ອງສະໜອງພະລັງງານໃຫ້ກັບປໍ້າສູນຍາກາດ ແລະ ແຈ້ງໃຫ້ HL Cryogenic Equipment ຮູ້ກ່ຽວກັບຂໍ້ມູນໄຟຟ້າໃນທ້ອງຖິ່ນ (ແຮງດັນ ແລະ ເຮີດຊ໌).-00-X
3.2.2 ປະເພດການເຊື່ອມຕໍ່ແບບ Bayonet ທີ່ມີແປນ ແລະ ສະກູ
ໂອເດວ
ການເຊື່ອມຕໍ່
ປະເພດ
ເສັ້ນຜ່າສູນກາງທີ່ກຳນົດໄວ້ຂອງທໍ່ພາຍໃນ
ຄວາມກົດດັນດ້ານການອອກແບບ
ວັດສະດຸ
ຂອງທໍ່ພາຍໃນ
ມາດຕະຖານ
ໝາຍເຫດ
Nominal Diameter of Inner Pipe
00X
8~16 ບາ
DN10, 3/8"
8~16 ບາ
ເຫຼັກສະແຕນເລດຊຸດ 300
Design Pressure
ຄວາມກົດດັນໃນການອອກແບບ.
08 ແມ່ນ 8bar,
16 ແມ່ນ 16 ບາ.
ວັດສະດຸຂອງທໍ່ພາຍໃນ.
A ແມ່ນ 304,
B ແມ່ນ 304L,
C ແມ່ນ 316,
D ແມ່ນ 316L,
E ແມ່ນອື່ນ.
F015
00X
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLHSF040X | ຊຸດແຍກໄລຍະທີ່ມີฉนวนສູນຍາກາດ | DN10, 3/8" | ອາເມເນຍ
| 300 Series Stainless Steel | ASME B31.3 | X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| ພາສາຝຣັ່ງເສັ້ນຜ່າສູນກາງທີ່ກຳນົດໄວ້ຂອງທໍ່ດ້ານນອກ:X | DN15, 1/2" | |||||
| ພາສາຝຣັ່ງແນະນຳໃຫ້ໃຊ້ ≤ 16 ບາ. ຫຼື ເລືອກປະເພດການເຊື່ອມຕໍ່ແບບເຊື່ອມ (≤40 ບາ).X | DN20, 3/4" | |||||
| ພາສາຝຣັ່ງສະພາບພະລັງງານ:X | DN25, 1" |
Nominal Diameter of Inner Pipe: Recommended ≤ DN25 or 1". Or selects the Vacuum Bayonet Connection Type with Flanges and Bolts (from DN10, 3/8" to DN80, 3"), Welded Connection Type (from DN10, 3/8" to DN150, 6")
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: ໄອສແລນ
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| ພາສາຝຣັ່ງ08 ແມ່ນ 8bar,00X | ແລະ 25, 32, 40. | DN10, 3/8" | 8~16 bar | 300 Series Stainless Steel | ASME B31.3 | 00: Design Pressure. 08 is 8bar, 16 is 16bar.
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| ພາສາຝຣັ່ງຊາມົວ00X | DN15, 1/2" | |||||
| ພາສາຝຣັ່ງສິນທິ00X | DN20, 3/4" | |||||
| ພາສາຝຣັ່ງພາສາທາຈິກ00X | DN25, 1" | |||||
| ພາສາຝຣັ່ງໄທ00X | DN32, 1-1/4" | |||||
| ພາສາຝຣັ່ງອຸສເບັກກິດສະຖານ00X | DN40, 1-1/2" | |||||
| ພາສາຝຣັ່ງໂຊຊາ00X | DN50, 2" | |||||
| ພາສາຝຣັ່ງຊູລູ00X | DN65, 2-1/2" | |||||
| ພາສາຝຣັ່ງໂອຣິຢາ00X | DN80, 3" |
Nominal Diameter of Inner Pipe: Recommended ≤ DN80 or 3". Or selects the Welded Connection Type (from DN10, 3/8" to DN150, 6"), Vacuum Bayonet Connection Type with Clamps (from DN10, 3/8" to DN25, 1").
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: ສະພາບພະລັງງານ:
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLHS00X00X | DN10, 3/8" | DN10, 3/8" | ເຫຼັກສະແຕນເລດຊຸດ 300 | 300 Series Stainless Steel | ASME B31.3 | 00: Design Pressure 08 is 8bar, 16 is 16bar, and 25, 32, 40.
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| ພາສາຝຣັ່ງDN15, 1/2"00X | DN15, 1/2" | |||||
| ພາສາຝຣັ່ງDN20, 3/4"00X | DN20, 3/4" | |||||
| ພາສາຝຣັ່ງDN25, 1"00X | DN25, 1" | |||||
| ພາສາຝຣັ່ງW03200X | DN32, 1-1/4" | |||||
| ພາສາຝຣັ່ງW04000X | DN40, 1-1/2" | |||||
| ພາສາຝຣັ່ງW05000X | DN50, 2" | |||||
| ພາສາຝຣັ່ງW06500X | DN65, 2-1/2" | |||||
| ພາສາຝຣັ່ງW08000X | DN80, 3" | |||||
| Hທໍ່ເສື້ອກັນໜາວສູນຍາກາດ00X | DN100, 4" | |||||
| Hຈີນ ວາວຄວບຄຸມການໄຫຼຂອງອົກຊີເຈນແຫຼວ00X | DN125, 5" | |||||
| Hລາຄາຂາຍສົ່ງຈີນຈີນມາດຕະຖານ ISO ຖັງ 2 ...00X | DN150, 6" |
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLHSລະບົບປໍ້າສູນຍາກາດແບບໄດນາມິກ00X | ຊຸດແຍກໄລຍະທີ່ມີฉนวนສູນຍາກາດ | DN10, 3/8" | 8~16 bar | 300 Series Stainless Steel | ASME B31.3 | 00: Design Pressure. 08 is 8bar, 16 is 16bar.
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| ພາສາຝຣັ່ງວັອດສະປອດ00X | DN15, 1/2" | |||||
| ພາສາຝຣັ່ງWeChat00X | DN20, 3/4" | |||||
| ພາສາຝຣັ່ງເຢຍລະມັນ00X | DN25, 1" |
Nominal Diameter of Inner Pipe: Recommended ≤ DN25 or 1". Or selects the Vacuum Bayonet Connection Type with Flanges and Bolts (from DN10, 3/8" to DN80, 3"), Welded Connection Type (from DN10, 3/8" to DN150, 6")
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: ພາສາກຣີກ
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
ພາສາເດນມາກ
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLລາວX | Vacuum Bayonet Connection Type with Clamps for Dynamic Vacuum Insulated Flexible Hose | DN10, 3/8" | ອາເມເນຍ
| 300 Series Stainless Steel | ASME B31.3 | X:Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| HLHເອສໂຕເນຍX | DN15, 1/2" | |||||
| HLHຟຣິຊຽນX | DN20, 3/4" | |||||
| HLHກູຣາຈາຣາຕີX | DN25, 1" |
Nominal Diameter of Inner Pipe: Recommended ≤ DN25 or 1". Or selects the Vacuum Bayonet Connection Type with Flanges and Bolts (from DN10, 3/8" to DN80, 3"), Welded Connection Type (from DN10, 3/8" to DN150, 6")
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: ໄອສແລນ
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
Power Condition: The site needs to supply power to the vacuum pumps and inform HL Cryogenic Equipment the local electricity information (Voltage and Hertz).
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLມາລາຢາລຳ00X | ພາສາມາວຣີ | DN10, 3/8" | 8~16 bar | 300 Series Stainless Steel | ASME B31.3 | 00: Design Pressure. 08 is 8bar, 16 is 16bar.
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| HLHDຊາມົວ00X | DN15, 1/2" | |||||
| HLHDສິນທິ00X | DN20, 3/4" | |||||
| HLHDພາສາທາຈິກ00X | DN25, 1" | |||||
| HLHDໄທ00X | DN32, 1-1/4" | |||||
| HLHDອຸສເບັກກິດສະຖານ00X | DN40, 1-1/2" | |||||
| HLHDໂຊຊາ00X | DN50, 2" | |||||
| HLHDຊູລູ00X | DN65, 2-1/2" | |||||
| HLHDໂອຣິຢາ00X | DN80, 3" |
Nominal Diameter of Inner Pipe: Recommended ≤ DN80 or 3". Or selects the Welded Connection Type (from DN10, 3/8" to DN150, 6"), Vacuum Bayonet Connection Type with Clamps (from DN10, 3/8" to DN25, 1").
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: Recommended ≤ 16 bar. Or selects Welded Connection Type (≤40 bar).
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
Power Condition: The site needs to supply power to the vacuum pumps and inform HL Cryogenic Equipment the local electricity information (Voltage and Hertz).
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLHDW01000X | Welded Connection Type for Dynamic Vacuum Insulated Flexible Hose | DN10, 3/8" | 8~40 bar | Stainless Steel 304, 304L, 316, 316L | ASME B31.3 | 00: Design Pressure 08 is 8bar, 16 is 16bar, and 25, 32, 40. .
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| HLHDW01500X | DN15, 1/2" | |||||
| HLHDW02000X | DN20, 3/4" | |||||
| HLHDW02500X | DN25, 1" | |||||
| HLHDW03200X | DN32, 1-1/4" | |||||
| HLHDW04000X | DN40, 1-1/2" | |||||
| HLHDW05000X | DN50, 2" | |||||
| HLHDW06500X | DN65, 2-1/2" | |||||
| HLHDW08000X | DN80, 3" | |||||
| HLHDW10000X | DN100, 4" | |||||
| HLHDW12500X | DN125, 5" | |||||
| HLHDW15000X | DN150, 6" |
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
Power Condition: The site needs to supply power to the vacuum pumps and inform HL Cryogenic Equipment the local electricity information (Voltage and Hertz).
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLHDT01000X | Vacuum Bayonet Connection Type with Clamps for Dynamic Vacuum Insulated Flexible Hose | DN10, 3/8" | 8~16 bar | 300 Series Stainless Steel | ASME B31.3 | 00: Design Pressure. 08 is 8bar, 16 is 16bar.
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| HLHDB01500X | DN15, 1/2" | |||||
| HLHDB02000X | DN20, 3/4" | |||||
| HLHDB02500X | DN25, 1" |
Nominal Diameter of Inner Pipe: Recommended ≤ DN25 or 1". Or selects the Vacuum Bayonet Connection Type with Flanges and Bolts (from DN10, 3/8" to DN80, 3"), Welded Connection Type (from DN10, 3/8" to DN150, 6")
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: Recommended ≤ 16 bar. Or selects the, Welded Connection Type (≤40 bar)
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
Power Condition: The site needs to supply power to the vacuum pumps and inform HL Cryogenic Equipment the local electricity information (Voltage and Hertz).
