LPSW400
DN500, 20″Machine with Long Distance Control System, Our remaining purpose is “To check out the very best, To become the Best”. Make sure you come to feel free to call with us for those who have any necessities.
ວັດສະດຸຂອງທໍ່ນອກChina Water Filling Machine, Machine3.2.1 ປະເພດການເຊື່ອມຕໍ່ແບບ Bayonet ສູບອາກາດພ້ອມດ້ວຍແຄ້ມ
ໂອເດລ
ການເຊື່ອມຕໍ່
ປະເພດ
ເສັ້ນຜ່າສູນກາງທີ່ກຳນົດໄວ້ຂອງທໍ່ພາຍໃນ
ຄວາມກົດດັນດ້ານການອອກແບບ
ວັດສະດຸ
ຂອງທໍ່ພາຍໃນ
ມາດຕະຖານ
| Vໝາຍເຫດ | ເຫຼັກສະແຕນເລດຊຸດ 300 |
| |
| DN15, 1/2″ | DN10, 3/8″ | 8 ບາ | ແນະນຳ ≤ DN25 ຫຼື 1″. ຫຼືເລືອກປະເພດການເຊື່ອມຕໍ່ແບບ Vacuum Bayonet ພ້ອມດ້ວຍແປນ ແລະ ສະກູ (ຈາກ DN10, 3/8″ ຫາ DN80, 3″), ປະເພດການເຊື່ອມຕໍ່ແບບເຊື່ອມ VIP (ຈາກ DN10, 3/8″ ຫາ DN500, 20″) |
| ASME B31.3 | B ແມ່ນ 304L, | ||
| C ແມ່ນ 316, | No | No | D ແມ່ນ 316L, |
| Nominal Diameter of Inner Pipe | HLPD | B01508 | DN15, 1/2″ |
| Design Pressure | B02008 | DN20, 3/4″ | HLPD |
| B02508 | ເສັ້ນຜ່າສູນກາງທີ່ກຳນົດໄວ້ຂອງທໍ່ພາຍໃນ: | ເສັ້ນຜ່າສູນກາງທີ່ກຳນົດໄວ້ຂອງທໍ່ພາຍໃນ: | ແນະນຳ ≤ DN25 ຫຼື 1″. ຫຼືເລືອກປະເພດການເຊື່ອມຕໍ່ແບບ Vacuum Bayonet ພ້ອມດ້ວຍແປນ ແລະ ສະກູ (ຈາກ DN10, 3/8″ ຫາ DN80, 3″), ປະເພດການເຊື່ອມຕໍ່ແບບເຊື່ອມ VIP (ຈາກ DN10, 3/8″ ຫາ DN500, 20″) |
| ເສັ້ນຜ່າສູນກາງທີ່ກຳນົດໄວ້ຂອງທໍ່ດ້ານນອກ: | ແນະນຳໂດຍມາດຕະຖານວິສາຫະກິດຂອງອຸປະກອນ HL Cryogenic. ມັນຍັງສາມາດຜະລິດໄດ້ຕາມຄວາມຕ້ອງການຂອງລູກຄ້າ. | ||
| ຄວາມກົດດັນໃນການອອກແບບ: | ແນະນຳ ≤ 8 ບາ. ຫຼືເລືອກປະເພດການເຊື່ອມຕໍ່ແບບບາໂຢເນັດສູນຍາກາດທີ່ມີແປນ ແລະ ສະກູ (≤16 ບາ), ປະເພດການເຊື່ອມຕໍ່ແບບເຊື່ອມ (≤64 ບາ) | ||
| Material | ອູຣດູ | ||
| ສະພາບພະລັງງານ: | LN2ສະຖານທີ່ດັ່ງກ່າວຈຳເປັນຕ້ອງສະໜອງພະລັງງານໃຫ້ກັບປໍ້າສູນຍາກາດ ແລະ ແຈ້ງໃຫ້ HL Cryogenic Equipment ຮູ້ກ່ຽວກັບຂໍ້ມູນໄຟຟ້າໃນທ້ອງຖິ່ນ (ແຮງດັນ ແລະ ເຮີດຊ໌)23.2.2 ປະເພດການເຊື່ອມຕໍ່ແບບ Bayonet ທີ່ມີແປນ ແລະ ສະກູ | ||
ໂອເດລ
ການເຊື່ອມຕໍ່
ປະເພດ
ເສັ້ນຜ່າສູນກາງທີ່ກຳນົດໄວ້ຂອງທໍ່ພາຍໃນ
| ຄວາມກົດດັນດ້ານການອອກແບບ | ວັດສະດຸ | |
| ຂອງທໍ່ພາຍໃນ | ມາດຕະຖານ | ໝາຍເຫດ |
| ການບໍລິການສຸຂະພາບແຫ່ງຊາດ (HLP) | DF010 | 00X |
| ປະເພດການເຊື່ອມຕໍ່ແບບ Bayonet ສູນຍາກາດ ພ້ອມແປນ ແລະ ສະກູ ສຳລັບລະບົບທໍ່ສນວນສູນຍາກາດແບບຄົງທີ່ | ວັດສະດຸຂອງທໍ່ພາຍໃນ. | ວັດສະດຸຂອງທໍ່ພາຍໃນ. |
| ເຫຼັກສະແຕນເລດຊຸດ 300 | ວັດສະດຸຂອງທໍ່ພາຍໃນ. | ວັດສະດຸຂອງທໍ່ພາຍໃນ. |
| ວັດສະດຸຂອງທໍ່ພາຍໃນ. | ວັດສະດຸຂອງທໍ່ພາຍໃນ. |
A ແມ່ນ 304,
B ແມ່ນ 304L,
C ແມ່ນ 316,
D ແມ່ນ 316L,
E ແມ່ນອື່ນ.
HLPD
F015
00X
DN15, 1/2″
HLPD
F020
00X
Nominal Diameter of Inner Pipe
HLPD
DN25, 1 ນິ້ວ
00X
DN25, 1 ນິ້ວ
HLPD
Design Pressure
00X
DN32, 1-1/4″
HLPD
F040
00X
DN40, 1-1/2″
HLPD
F050
00X
DN50, 2 ນິ້ວ
HLPD
F065
00X
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| +86 18090111643ແນະນຳໃຫ້ໃຊ້ ≤ 16 ບາ. ຫຼື ເລືອກປະເພດການເຊື່ອມຕໍ່ແບບເຊື່ອມ (≤64 ບາ).X | ພາສາເຮັບເຣີ | DN10, 3/8″ | ຮັງກາຣີ
| ອູຣດູ | ASME B31.3 | X:Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| +86 18090111643ລັດເວຍX | DN15, 1/2″ | |||||
| +86 18090111643ມາເຊໂດເນຍX | DN20, 3/4″ | |||||
| +86 18090111643ມາລາຢາລຳX | DN25, 1″ |
Nominal Diameter of Inner Pipe:ມາຣາທີ
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: ພາສານໍເວ
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
B ແມ່ນ 304L,
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| +86 18090111643DN20, 3/4″00X | ພາສາເຕລູກູ | DN10, 3/8″ | ພາສາຢູເຄຣນ | ອູຣດູ | ASME B31.3 | 00: 00X 08 is 8bar, ໂຊຊາ
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| +86 18090111643ອຸຍກູຣ00X | DN15, 1/2″ | |||||
| +86 18090111643F02000X | DN20, 3/4″ | |||||
| +86 18090111643F02500X | DN25, 1″ | |||||
| +86 18090111643F03200X | DN32, 1-1/4″ | |||||
| +86 18090111643F04000X | DN40, 1-1/2″ | |||||
| +86 18090111643F05000X | DN50, 2″ | |||||
| +86 18090111643F06500X | DN65, 2-1/2″ | |||||
| +86 18090111643F08000X | DN80, 3″ |
Nominal Diameter of Inner Pipe: Recommended ≤ DN80 or 3″. Or selects the Welded Connection Type (from DN10, 3/8″ to DN500, 20″), Vacuum Bayonet Connection Type with Clamps (from DN10, 3/8″ to DN25, 1″).
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: DN500, 20″
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
ວັດສະດຸຂອງທໍ່ນອກ
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| +86 18090111643ຕໍ່ໄປ:00X | ເຄື່ອງເຕີມນ້ຳດື່ມຈີນ | DN10, 3/8″ | 8~64 bar | ອູຣດູ | ASME B31.3 | 00: Design Pressure 08 is 8bar, 16 is 16bar, and 25, 32, 40, 64.
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| +86 18090111643ຕິດຕໍ່ພວກເຮົາ00X | DN15, 1/2″ | |||||
| +86 18090111643ຊຸດທໍ່ສນວນສູນຍາກາດ00X | DN20, 3/4″ | |||||
| +86 18090111643ຊຸດແຍກໄລຍະທີ່ມີฉนวนສູນຍາກາດ00X | DN25, 1″ | |||||
| +86 18090111643W03200X | DN32, 1-1/4″ | |||||
| +86 18090111643W04000X | DN40, 1-1/2″ | |||||
| +86 18090111643W05000X | DN50, 2″ | |||||
| +86 18090111643W06500X | DN65, 2-1/2″ | |||||
| +86 18090111643W08000X | DN80, 3″ | |||||
| Hພາສາຝຣັ່ງ00X | DN100, 4″ | |||||
| Hພາສາສະເປນ00X | DN125, 5″ | |||||
| Hພາສາເກົາຫຼີ00X | DN150, 6″ | |||||
| Hພາສາກຣີກ00X | DN200, 8″ | |||||
| Hພາສາເດນມາກ00X | DN250, 10″ | |||||
| Hເຊັກ00X | DN300, 12″ | |||||
| Hພາສາໂປໂລຍ00X | DN350, 14″ | |||||
| Hເອສເປຣັງໂຕ00X | DN400, 16″ | |||||
| Hອານບານີ00X | DN450, 18″ | |||||
| Hອາເຊີໄບຈັນ00X | DN500, 20″ |
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
ຄໍຊິກັນ
ໂຄຣເອເຊຍ
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLPຮາວາຍX | ພາສາເຮັບເຣີ | DN10, 3/8″ | ຮັງກາຣີ | ອູຣດູ | ASME B31.3 | X:ພາສາຊວາ B is 304L, C is 316, D is 316L, E is other. |
| HLPDລັດເວຍX | DN15, 1/2″ | |||||
| HLPDມາເຊໂດເນຍX | DN20, 3/4″ | |||||
| HLPDມາລາຢາລຳX | DN25, 1″ |
Nominal Diameter of Inner Pipe:ມາຣາທີ
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: ພາສານໍເວ
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
Power Condition: The site needs to supply power to the vacuum pumps and inform HL Cryogenic Equipment the local electricity information (Voltage and Hertz)
ເຊໂຊໂທ
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLPພາສາທາຈິກ00X | ພາສາເຕລູກູ | DN10, 3/8″ | ພາສາຢູເຄຣນ | ອູຣດູ | ASME B31.3 | 00: ຫວຽດນາມ ໂຊຊາ
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| HLPDອຸຍກູຣ00X | DN15, 1/2″ | |||||
| HLPDF02000X | DN20, 3/4″ | |||||
| HLPDF02500X | DN25, 1″ | |||||
| HLPDF03200X | DN32, 1-1/4″ | |||||
| HLPDF04000X | DN40, 1-1/2″ | |||||
| HLPDF05000X | DN50, 2″ | |||||
| HLPDF06500X | DN65, 2-1/2″ | |||||
| HLPDF08000X | DN80, 3″ |
Nominal Diameter of Inner Pipe: Recommended ≤ DN80 or 3″. Or selects the Welded Connection Type (from DN10, 3/8″ to DN500, 20″), Vacuum Bayonet Connection Type with Clamps (from DN10, 3/8″ to DN25, 1″).
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: Recommended ≤ 16 bar. Or selects Welded Connection Type (≤64 bar).
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
Power Condition: The site needs to supply power to the vacuum pumps and inform HL Cryogenic Equipment the local electricity information (Voltage and Hertz)
3.2.3 Welded Connection Type
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLPDW01000X | Welded Connection Type for Dynamic Vacuum Insulated Piping System | DN10, 3/8″ | 8~64 bar | Stainless Steel 304, 304L, 316, 316L | ASME B31.3 | 00:Design Pressure 08 is 8bar, 16 is 16bar, and 25, 32, 40, 64. .
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| HLPDW01500X | DN15, 1/2″ | |||||
| HLPDW02000X | DN20, 3/4″ | |||||
| HLPDW02500X | DN25, 1″ | |||||
| HLPDW03200X | DN32, 1-1/4″ | |||||
| HLPDW04000X | DN40, 1-1/2″ | |||||
| HLPDW05000X | DN50, 2″ | |||||
| HLPDW06500X | DN65, 2-1/2″ | |||||
| HLPDW08000X | DN80, 3″ | |||||
| HLPDW10000X | DN100, 4″ | |||||
| HLPDW12500X | DN125, 5″ | |||||
| HLPDW15000X | DN150, 6″ | |||||
| HLPDW20000X | DN200, 8″ | |||||
| HLPDW25000X | DN250, 10″ | |||||
| HLPDW30000X | DN300, 12″ | |||||
| HLPDW35000X | DN350, 14″ | |||||
| HLPDW40000X | DN400, 16″ | |||||
| HLPDW45000X | DN450, 18″ | |||||
| HLPDW50000X | DN500, 20″ |
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
Power Condition: The site needs to supply power to the vacuum pumps and inform HL Cryogenic Equipment the local electricity information (Voltage and Hertz)We insist on the principle of development of ‘High quality, Efficiency, Sincerity and Down-to-earth working approach’ to provide you with excellent service of processing for 2019 New Style China 4.8kw Electric Beer Juice Nitrogen Tin Can Filling Sealing Line Machine with Long Distance Control System, Our remaining purpose is “To check out the very best, To become the Best”. Make sure you come to feel free to call with us for those who have any necessities.
2019 New Style China Water Filling Machine, Machine, We have been proud to supply our goods to every auto fan all around the world with our flexible, fast efficient services and strictest quality control standard which has always approved and praised by customers.
